A specialised kit for spreading the steering knuckle to enable the removal / installation of shock absorbers without the risk of damaging the aluminium or cast iron knuckle.
The tool is adjustable and suitable for steering knuckles with either a centralised slot or a non centralised slot.
Specially design for twin ball joints as fitted to Audi | VW control arms.
SKU | ET7111 |
Barcode # | 9321280325562 |
Brand | Automotive |
Vehicle Make | VAG |
12 Months
Others also bought
Master Radiator Pressure Test Kit
Our new updated radiator pressure test kit sets the new industry benchmark!
Faster, easier, and more comfortable to use, than existing kits.
Perform cooling system leak tests, vacuum type coolant refills, and leak tests on radiator caps.
- Updated adaptors (more coverage than older kits) - includes new Volvo Hybrids
- Updated pressure pump, coolant refill and adaptor design
- Faster refill speed - 91 ml / sec vs 37 ml
- Connectors are compatible with superceded adaptor kits
More from this category
BMW CV Output Shaft Kit
A specialised kit for removing / installing seized output CV shafts in wheel hubs. This kit suits many BMW vehicles, but not the E53 X5. For this vehicle, refer ET1253D.
- Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E83 | E85 | RR1
BMW Electric Power Steering Rack Socket
A specialised socket for servicing the electric power steering rack adjustment screw on selected BMW vehicles.
- Applications: 1 series E81, E82, E87, E88 | 3 series E90, E91, E92,E93 | Z4, E89
BMW Lower Control Arm Caster Bush Extractor
A time saving tool for removal and reinstallation of the caster arm (thrust arm) bushing mounts on BMW 3 Series vehicles.
- Chassis: E30 | E36 | E46
BMW Steering Rack Thrust Socket
A specialised three pin socket for adjusting the EPS steering thrust piece on steering racks, applicable to many BMW and Mercedes models.
- Applications: BMW 1 series (2011>) | 3 series (2012>) | 4 series (2013>) | X1 (2015>) | X3 (10-17), Mercedes C Class (2014>) | S Class (2014>)
- Use with 28mm socket
- OEM Equiv: 32106891974
Hydraulic Steering System Press Kit
For removing and installing bushes and bearings. The hydraulic cylinder helps save time and energy compared to manual methods.
Universal application.
- Includes M20 x P2.5 spindle
- Sleeve sizes: 18-60mm ID / 26-68mm OD, with 2mm increments
Mercedes Lower Control Arm Bush Remover
A time saving tool which allows bush replacement to be done on vehicle without having to remove the lower control arm This kit removes / installs the front lower control arm bushes on the W170 | W202 models.
Bush replacement can be done on car without having to remove the lower control arm, allowing the job to be performed in about an hour.
- W202 Chassis (94 - 00): C180 | C200 | C220 | C230 | C240 | C250 | C280 and C36 | C43 | C43T AMG