An essential master kit of diesel injector seat cutters. Injector seat cutters are designed to bore the injector seat to the precise dimensions required when replacing diesel injectors. Otherwise there is a risk of blow back / poor emissions.
This master kit contains 19 pcs, including 15 individual reamers, plus pilot post / injector cleaner / hex key, and T handle.
- Suits a wide range of vehicles
- Please refer to attached PDS (download link) for individual reamer details.
- Use with grease to help catch debris.
SKU | ET2210 |
Barcode # | 9321280408777 |
Brand | Automotive |
Product weight | 2.4600kg |
Shipping weight | 2.460000kg |
12 Months
Others also bought
Multimeter Lead Set
Comprehensive kit for quickly & securely connecting into wiring.
- 2 way LED testers Black / red multimeter connector leads
- Male / female round terminal to banana plug
- Male / female flat blade terminal to banana plug
- Variable resistors with banana terminals
- Needle / piercing probes
- Heavy duty alligator clips
Injector Shaft Cleaning Kit
Cleaning tools for injector shaft / injector pump cleaning, and other similar applications.
Removes carbon deposits which is important when replacing injectors to avoid leaks.
- Brushes - 2 x 18mm / 2 x 19mm / 2 x 21mm / 2 x 24mm / 2 x 26mm Brushes - 2 x 9mm x 100mm (300mm length)
- Twisted Wire Brush x 2
- Flexible Bit Holder x 1
- Brush Holder with Adapter x 1
- Mounting Bar
- Sealing Plugs x 8
- Plastic Sleeve for Brush
More from this category
17T Hydraulic Injector Extractor Kit
A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle.
Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm
- M14 x 1.5 pitch Pulling Spindle 240mm long.
- M14 x 1.5 pitch Pulling Spindle 315mm long.
- M17 x 1.0 pitch Pulling Spindle 240mm long.
- M17 x 1.0 pitch Pulling Spindle 315mm long.
- M18 x 1.5 pitch Pulling Spindle 315mm long.
- M25 x 1.0 pitch Pulling Spindle 240mm long.
BMW Diesel Injector Removal Kit
A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.
The special extraction bridge and pull spindle allows for quick / safe injector removal.
To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.
- Engine codes: M47TU | M57 | M57TU
- Spindle 16 (one side M17) for mounting in the injector
- 29mm socket for disassembling the electric unit
- Internal 6 Pt wrench for removing the injector needle
Chrysler Injector Puller
This specialised injector puller is designed to safely extract tightly stuck injectors on Chrysler 2.5L | 2.7L CRD 16 valve VM engines.
Diesel Injection Line Wrench Kit
A specialised kit of diesel injection line wrenches. These open end 12 point crowsfoot sockets are designed for servicing the union nut on high pressure lines on common rail injection engines.
- 14mm | 17mm | 19mm
- 12 point
- 1/2" Sq Drv
Diesel Injector Nozzle Extractor
Designed for removal of the lower components of diesel injectors. This is necessary before beginning a complete injector rebuild.
Injector should be removed from the engine before using this tool. Mount injector securely on a bench before unscrewing the injector solenoid from the injector. For instance, using ET0321.
Do NOT use air tools with this tool.
- Applications: Bosch, Delphi, Denso, Siemens injectors
- Needle head dia: 12.5-13.5mm
- Clamping collar dia: 24mm
Diesel Injector Puller
Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.
- Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
- Slide hammer thread: M12 | 175mm length (without adaptors).