A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

A convenient transfer syringe with a 1.5 litre capacity, and 400mm extension tube.

This syringe is made from a high quality plastic that is resistant to most workshop fluids. The NBR seals supplied with this unit are designed for oil recovery, and should not be used with brake fluid (or other corrosive fluids like petrol / diesel).

• Robust plastic construction
• Transparent design
• Dual NBR seals

Updated version with 'sharp tip' tip for better grip. Designed for disconnecting automotive electrical connectors while avoiding damaging locking tabs.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Sharp tip
• 185mm overall length

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

An optional hose to use with the ET3586 fluid extractor. Converts our fluid extractor into a suction brake bleeder, with the benefit of a large 10L tank.

• Use with ET3586 fluid extractor
• 420mm length

A multipurpose fluid syringe ideal for the transfer of brake fluid, and other fluids from components such as differentials / gearboxes.

This syringe is fitted with EPDM seals which are designed for brake fluid. NBR seals are available as an option for oil transfer.

We supply these syringes with a BONUS wall mount.

• 200ml capacity
• Robust plastic construction
• Transparent design
• Dual seals

Next gen rechargeable pump for transferring a wide variety of workshop fluids, including DEF / Adblue.

• 2900mAh lithium battery can discharge up to 300 litres. Recharge using USB cable.
• Adjustable telescopic suction tube (380-520mm)
• Suitable fluids include Antifreeze, Windshield fluid, Kero, Diesel, AdBlue & oils (up to ISO 32). Do not use with Acids, Acetone, Petrol.

An easy and safe solution for transferring fluids, especially media which is unsafe for body contact. Draws in & pumps out liquid in a single stroke.

Ideal for fuel oils, mineral oils, synthetic & biological oils, cooling liquids and spirits.

• Rugged aluminium die cast head
• NBR seals (not suitable for use with brake fluid)
• 450ml transfer container
• Supplied with 8 foot of vinyl hose (4 foot with each valve)

A convenient transfer syringe with a 1.5 litre capacity, and 400mm extension tube.

This syringe is made from a high quality plastic that is resistant to most workshop fluids. The NBR seals supplied with this unit are designed for oil recovery, and should not be used with brake fluid (or other corrosive fluids like petrol / diesel).

• Robust plastic construction
• Transparent design
• Dual NBR seals