Universal Diesel Injector Seat Cleaner Kit

SKU: ET0175


This kit helps clean / decarbonise the injector hole. Plus the seat cutters clean the bottom of the injector hole to allow proper setting of the new copper washer.

Helps avoid blow back due to poorly seated injectors.

  • 3 seat cutters: 17mm flat | 17mm angled | 21mm angled
  • Includes washer removal tool, injector blanking plugs (stop debris entering cylinders), wire brush cleaning set for chamber walls and centralising stem for correct cleaning seating angle

SKU ET0175
Barcode # 9321280354128
Brand Automotive
Product weight 2.1600kg
Shipping weight 2.160000kg
Vehicle Make Universal

12 Months

More from this category

Common Rail Injector Screw Removal Kit

Common Rail Injector Screw Removal Kit

Special tools for internal repair of Bosch | Siemens | Denso CR injectors. These tools are designed to remover the injector's internal fittings, and include injector ball valve lapping tools and guide.

  • Injector ball valve lapping tools & guide (3x)
  • 10mm Hex Male x 6.6mm dia Hole Security Insert x 21mm external Hex 1/2" Sq Drv
  • 10mm Hex Male x 7.6mm dia Hole Security Insert x 21mm external Hex 1/2" Sq Drv
  • Denso CR injector valve seat removal tool
  • Bosch CR 16mm injector screw removal socket (8 sided) 1/2" Sq Drv
  • Siemens CR injector internal fixing removal tool

Diesel Injector Flow Tester

Diesel Injector Flow Tester

This return fuel volume tester is for use on the injector return side of a common rail diesel system. Very easy to use - simply take off the return pipe connectors on the injectors and substitute with the fuel lines from this test kit.

  • Measure return fuel flow on common rail injectors
  • Identify worn / blocked / inoperative injectors quickly
  • For diesel vehicles up to 6 cylinders
  • Adaptors for Bosch | Siemens | Denso | Delphi

Diesel Injector Nozzle Tester

Diesel Injector Nozzle Tester

This practical tool helps test diesel injectors for leakage, spray patterns, opening pressure, and leakage between injector needle and injector body.

Suitable for pressure-activated injectors. An electronic switching device (not supplied) is needed for this unit to be able to test common rail type injectors.

  • With transparent tank and two connecting pipes - M12 | M14
  • Pressure range: 0-600 Bar

Diesel Injector Socket Kit

Diesel Injector Socket Kit

This socket set is specially designed for removing diesel injectors, including new style sockets for late model engines including Duratorq on Ford Mondeo / Transit, and those used on late model Land Rovers.

Professional quality chrome moly sockets.

  • 1/2" Sq Drv: 21 x 89mm | 22 x 78mm | 22 x 110mm | 27 x 78mm | 28 x 78mm | 28 x 83mm
  • The 28mm socket features a location collar for 2.4D | 2.5D engines on Alfa Romeo / Land Rover.