Chuck Head Assembly

3103000
SKU: 3103000-CHA

Chuck Head Assembly


Replacement chuck head assembly for the Sonsbeek 3103000 driveway tyre inflator.

SKU 3103000-CHA
Barcode # 9321280336155
Brand Sonsbeek

Consumable


You may also like


Promo
Sonsbeek Driveway Tyre Inflator

Sonsbeek Driveway Tyre Inflator

Supply Pressure: Maximum 13.8 BAR, Minimum 6.9 BAR, Recommended clean filtered air

Body Construction: Die cast aluminium with steel operating lever and impact absorbing bumper

Pressure Range: 0-9.6 BAR (0-138lbf/in2) standard

Gauge: Linear with magnifying window

  • Inlet size: 1/4" BSP
  • Measurement range: 0 - 160 PSI


More from this category


Ajax 1/4" Female Clip On Chuck

Ajax 1/4" Female Clip On Chuck

Ajax sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Ajax sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

  • 1/4" BSP female inlet
  • Clip On connector
  • Sealing type chuck

Sonsbeek Clip On Chuck Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

  • 6mm hose tail
  • Clip on chuck
  • Sealing type

Driveway Tyre Inflator Head Repair Kit

Driveway Tyre Inflator Head Repair Kit

A head repair kit for the Sonsbeek 3103000 tyre inflator.

Hold On Chuck

Hold On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

  • 1/4" BSP female connection
  • Brass construction

Large Bore Clip On Tyre Chuck

Large Bore Clip On Tyre Chuck

Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

Large bore head is designed for use with earthmoving vehicles.

  • 1/4" BSP female connector
  • Single straight large bore chuck
  • Non sealing type

Large Bore Clip On Tyre Chuck

Large Bore Clip On Tyre Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

Large bore chucks are designed for use with earthmoving vehicles.

  • 1/4" BSP female connector
  • Single straight large bore chuck
  • Sealing type